Best Colour for Roller Shutters: How to Choose One You Will Not Regret

Black AllGuard roller shutters matched to the window frames on a dark brick home

The best colour for roller shutters is the one you stop noticing a week after they go up. Shutters cover a lot of wall, they stay for decades, and a colour that looked sharp on a sample chip can dominate a facade. The choice is simpler than the chart suggests if you make it in the right order.

You are choosing two colours, not one

A roller shutter has two visible parts and each can be a different colour:

  • The pelmet box and guides: the frame that is always on show, shutter up or down
  • The curtain: the slats, which only show when the shutter is lowered

Most regret comes from treating this as one decision. The frame is seen every day of the year. The curtain is seen from the street only when the shutter is down. Get the frame right first.

AllGuard: allguard roller shutter slat colour samples rotated

Match the window frames, not the walls

This is the rule that does the most work. Match the pelmet and guides to your existing window frames, and the shutter reads as part of the window. Match them to the wall and you get a box in a third colour sitting between two others.

On a red brick home in Blacktown with white aluminium windows, white frames disappear and anything else looks added on. On a newer rendered home at Wadalba or Warnervale with black or charcoal window frames, a dark frame is the quiet choice. If your window frames are timber, pick the closest neutral to the trim paint.

The best colour for roller shutters in summer heat

Lighter colours reflect more sun and dark colours absorb more. That is true and worth knowing, but it matters less than people expect.

A shutter keeps a room cool mainly because it stops the sun before it reaches the glass and traps a layer of still air behind the curtain. The slats are foam filled. A dark shutter does all of that too. What changes is the surface. A dark curtain on a west wall gets hot to touch and radiates a little more warmth into that air gap.

So if you have a west-facing wall in Penrith or Campbelltown and no strong preference, go lighter on the curtain. If the house suits a dark shutter, choose dark and do not lose sleep over it. Having the shutter matters far more than its colour. The government's YourHome guide to shading explains why external shading works.

AllGuard: allguard black roller shutters dark brick home

How colours wear over time

Every powder-coated finish weathers. The question is which colours show it.

  • Dark colours show chalky fading, dust and salt film sooner, and show it unevenly if part of the shutter is shaded by an eave
  • Bright white shows dirt streaks below the slat vents and around the guides
  • Mid tones such as cream, beige, light grey and stone hide both and are the most forgiving

On the coast, salt is the bigger factor. From The Entrance to Umina, shutters facing the water need a hose down a few times a year whatever the colour. Do not hose into the top box. The Bureau of Meteorology's climate data shows how strong UV is along this coast for most of the year, which is what drives fading.

Colours we talk people out of

Some choices look good on day one and poorly later:

  1. Matching a bold feature wall. The wall will be repainted before the shutter wears out
  2. A dark curtain with a light frame, which outlines every window like a picture
  3. Choosing from a phone screen or a printed brochure, neither of which shows true colour
  4. A different colour on every side of the house

We bring physical samples to every measure for this reason. Hold them against the window frame in daylight, on the wall they will go on.

Strata, estates and heritage rules

In a unit or townhouse, colour may not be your choice at all. Many owners corporations specify one colour for all external fittings so the building looks uniform. Get the by-law and the approval in writing before ordering.

Some newer estates have design guidelines covering external colours, and heritage conservation areas have their own controls. A quick call to council or the estate manager saves an expensive mistake. The NSW Government guide to building and renovating is a useful starting point for what needs approval.

Thinking about resale and adding more later

Neutral frames and curtains suit the next owner as well as you. They also make staging easier. If you shutter four windows now and four next year, a standard neutral is simple to match. An unusual colour may not be.

Every AllGuard shutter is made to measure in our own factory at Charmhaven, in a range of powder-coated colours. You can see the range of roller shutters we make, including roller shutters on the Central Coast.

What to do before you choose

Photograph each side of the house in daylight. Note the window frame colour, the gutter and fascia colour and the roof. Check for strata or estate rules. Then book a free measure and quote or call 1300 884 260, and choose from real samples against the real wall.

Frequently asked questions

What is the best colour for roller shutters?

The best colour for roller shutters is usually one that matches your existing window frames, so the shutter looks like part of the window. Neutral mid tones such as cream, light grey and stone hide dust and fading best. Choose from physical samples held against the house in daylight.

Do dark roller shutters make a room hotter?

Dark roller shutters absorb more heat at the surface than light ones, but the difference inside the room is small. The shutter blocks the sun before it reaches the glass and the foam-filled slats and air gap do most of the work. On a harsh west wall, a lighter curtain is slightly better.

Can the shutter and the frame be different colours?

Yes, the pelmet box and guides can be one colour and the curtain another. The frame is always visible, so match it to your window frames first. Keeping the curtain the same or a close tone gives the cleanest look. Strong contrast outlines each window.

Do roller shutter colours fade?

All powder-coated colours weather slowly in strong sun, and dark colours show it sooner as a chalky, uneven fade. Light and mid tones hide weathering better. Washing with mild detergent and water a few times a year, more often near the ocean, keeps the finish looking even.

Do I need strata approval for roller shutter colours?

Yes, in most strata schemes you need owners corporation approval for roller shutters, and many specify the colour. Get the approval in writing before you order. Detached houses generally have a free choice, except in heritage conservation areas and some estates with design guidelines.